sorry for not posting for so long, but I got a relapse and was sick again. Now I hope it will be better...
Today I felt like a gynecologist! I installed a 8mm fuel line into the pan... Not a simple job, but now it is completed I can be sure my bigger motor will never run too lean due to lack of fuel!
I zip-tied the fuel line in place. I chose a poly-coated 8mm copper line which is also used for LPG-conversions:
the holes in the rubber grommets had to be enlarged to accomodate the bigger fuel line
new vs. old fuel line
inside the tunnel ( on the right is a LED torch to shed some light...)
this is the front access opening, just big enough to put my hand in...
Hi Markus, good job! The bigger fuel line will be much better for the 2 liter engine ;-)
AntwortenLöschenThank you again for your helping hand.
Ralli
(sorry, for my super English)